TSP Racing G Series Coilover kits are built for road and track use, TSP's Coilovers are fully height-adjustable, allowing you to keep the ride height the same as factory, or up to 50mm/2in lower. Damping of the piston valves are matched to each spring rate. The springs are preloaded from the factory, so you don't have to configure that before driving. Just set your ride height and damping preference with the 24 click linear adjustments. The engineers in our factory invest time and money into research and development to ensure the highest quality, best performance kits on the market. TSP Racing Coilovers are not 'one size fits all' with adapters. Each kit is designed specifically for the vehicle, and all kits are tested and developed to ensure maximum performance.
Street Spring Rates
Front
8kg/mm or 448lbs/in
Rear
10kg/mm or 560lbs/in
Each kit contains:
4 x Suspension dampers (either one piece or 2 piece dampers depending on vehicle)
4 x SAE-9254 cold-wound steel springs
4 x Damping force adjustment knobs
2 x Aluminum alloy pillow ball top hat plates
2 x Spanner wrenches to adjust ride height
Owner's manual available online
Specs
G-Street $900.00
24 Click Linear Damping Adjustments
Aluminum Plates with Camber Adjustments in the front and Aluminum Plates with Pillow Ball Bushings in the rear
Ride Height Adjustable Shocks
OEM Fitment with brackets and mounting points
Tools
Tools that are included in the kit are the spanner wrenches and your adjustment knobs. These tools are what give you the ability to really customize and tune your new suspension system.
The Spanner wrenches are a crucial tool in adjusting the ride height of your vehicle. They allow you to adjust the position of the shock inside the body and insure the tension on your spring.
The adjustment knobs are used to help you customize the overall feel of your ride, whether your damping is soft or firm.
On G-Racing coilovers with 32 click adjustment your recommended settings are;
17-32: Suggested for track use. 9-16: Suggested for mountain/aggressive use. 1-8: Suggested for common street use.
On G-Street Coilovers with 24 click adjustment your recommended settings are;
17-24: Suggested for sportier/aggressive use. 9-16: Suggested for spirited driving use. 1-8: Suggested for common street use.
Warranty
TSP Racing coilovers come with a 1 year unlimited mile limited warranty that covers all the main shock body components.
6 month warranty of consumables like rubber top mount, end links, etc
Camber plates are not covered under this warranty and have warranty because of the metal on metal contact.
All kits are completely rebuildable and individual parts are available separately for purchase.
Adjuster Extensions
Adjuster extensions allow you to remotely adjust your damping on your TSP Racing Coilovers, which is especially handy when they are in hard to reach locations.
Product Description
TSP Racing G Series Coilover kits are built for road and track use, TSP's Coilovers are fully height-adjustable, allowing you to keep the ride height the same as factory, or up to 50mm/2in lower. Damping of the piston valves are matched to each spring rate. The springs are preloaded from the factory, so you don't have to configure that before driving. Just set your ride height and damping preference with the 24 click linear adjustments.The engineers in our factory invest time and money into research and development to ensure the highest quality, best performance kits on the market. TSP Racing Coilovers are not 'one size fits all' with adapters. Each kit is designed specifically for the vehicle, and all kits are tested and developed to ensure maximum performance.
Street Spring Rates
Front
12kg/mm or 672lbs/in
Rear
6kg/mm or 336lbs/in
Damper Style
Front
A-Arm
Rear
Trailing Arm
Each kit contains:
4 x Suspension dampers (either one piece or 2 piece dampers depending on vehicle)
4 x SAE-9254 cold-wound steel springs
4 x Damping force adjustment knobs
2 x Aluminum alloy pillow ball top hat plates
2 x Spanner wrenches to adjust ride height
1 x Owners manual with warranty card
Instruction Manuals
Got your new coilovers and need to know how to properly adjust them?
Aluminum alloy upper mounts, surface anodized treatment, very strong, heat-resistant, wear-resistant, corrosion-resistant aluminum oxide layer. TSP Racing rubber top plates are utilized frequently on our kits. If the front of the vehicle utilizes a camber plate, the rear will use a rubber top plate, although pillowball tops are frequently available for dedicated track vehicles. For all kits in which a camber plate cannot be utilized (A-arm suspensions) the top plates will be rubber front and rear. The main design feature of the rubber top plate is that it dampens NVH from reaching the cabin as much as possible enabling an OEM-like quiet ride. All rubber top plates have a durometer rating of 75A in order to achieve the best balance between performance and comfort.
Pillow Ball Top Hats
The pillowball top plate is used as an upgrade in the rear of a vehicle in lieu of the rubber top plate. Rubber is used as standard to limit NVH from making its way into the cabin although this upgrade is available on various chassis at the customer's request. Please contact us directly to see what options are available for your specific platform. The pillowball top plate is a good upgrade for customers seeking a more track oriented, rigid setup where NVH is not much of a factor.
SAE9254 Steel Springs
Cold roll formed, anti-deformed with its excellent steel property and prolonged life span.3 main styles are used; linear, s-barrel, and v-barrel
Springs are marked with their length and spring rate in mm-kg/mm for example 220-07 os a 220 mm long spring with 07kg/mm spring rate.
French TOTAL Rotary Dedicated Oil
Corresponds to more changing stroke, stable properties can delay the recession, and remain similar viscosity even at extremely high temperatures.
NOK Oil Seals
We use the same NOK Oil seals as Tein. They are used for Anti-attrition and spoilage after long-term usage. Reducing the problem of oil leaks.
Lower Mounts/Base
The lower mount is where our suspension bolts to your wheel hubs. Each lower mount is designed to be an OEM replacement. We provide any and all OEM mounting points and brackets that were on the OEM shock. The lower mount, and the upper mount, is where reverse engineering the OEM suspension plays its biggest role. The process ensures everything is welded and mounted in OEM positions so that your brake lines, wheel speed sensors, and harnesses are a direct fit. Our lower mounts, whenever possible, are made of seamless steel tubing and all brackets are hand welded. Once the lower mount is completed, it is then sand blasted and powder coated in order to prevent rust and corrosion.
Shocks
We are now at the center point of our kit. As you can imagine, we have a wide variety of shock types, lengths and diameters. Each vehicle depending on our data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in our factory and dyno tested before use in our kits. This also helps to ensure there are no oil leaks or noise. Shocks are paired together by their compression and rebound numbers after dyno testing to a 3% variance from side to side. This means that in your kit, the fronts and rears are paired almost exactly the same to ensure proper ride quality and performance of the suspension. Each shock is coated in black via EPD, which provides a cohesive appearance, and to help with corrosion resistance.
Adjustment Rings
Height adjustments are made with separate CNC-Machined locking rings for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows for a conservative drop to more aggressive ride heights for an aggressive stance, or to fine tune your suspension for the circuit to gain full potential of your vehicle's handling capabilities.
Our basic lock ring is located under the spring seat. This ring is special because its primary function is to torque against the spring seat and lock it in place. The lock ring will torque and secure itself to the spring seat securely once properly tightened so that the preload does not change unless the customer decides to make a change. The spring seat and basic lock ring are the two rings that are responsible for gaining leverage to make height adjustment for our coilover systems. Please note that you do not turn the rings independently to adjust height, you simply use them as a leverage point to rotate the shock body into and out of the lower mount to adjust height, but they must be locked together to achieve this.
The lower lock ring is tasked with keeping the shock locked into place once final ride height is selected. The lower lock ring must be loosened before making any sort of height adjustment and locked down properly afterwards using our spanner wrenches.
If you want to lower the vehicle, you spin the spring seat clockwise to thread the shock body into the lower mount.
Tools
Tools that are included in the kit are the spanner wrenches and your adjustment knobs. These tools are what give you the ability to really customize and tune your new suspension system.
The Spanner wrenches are a crucial tool in adjusting the ride height of your vehicle. They allow you to adjust the position of the shock inside the body and insure the tension on your spring.
The adjustment knobs are used to help you customize the overall feel of your ride, whether your damping is soft or firm.
On G-Racing coilovers with 32 click adjustment your recommended settings are;
17-32: Suggested for track use. 9-16: Suggested for mountain/aggressive use. 1-8: Suggested for common street use.
On G-Street Coilovers with 24 click adjustment your recommended settings are;
17-24: Suggested for sportier/aggressive use. 9-16: Suggested for spirited driving use. 1-8: Suggested for common street use.
Warranty
TSP Racing coilovers come with a 1 year unlimited mile limited warranty that covers all the main shock body components.
6 month warranty of consumables like rubber top mount, end links, etc
Camber plates are not covered under this warranty and have warranty because of the metal on metal contact.
All kits are completely rebuildable and individual parts are available separately for purchase.
Adjuster Extensions
Adjuster extensions allow you to remotely adjust your damping on your TSP Racing Coilovers, which is especially handy when they are in hard to reach locations.
Aluminum Plates with Camber Adjustments in the front and Aluminum Plates with Pillow Ball Bushings in the rear
Ride Height Adjustable Shocks
OEM Fitment with brackets and mounting points
Contact Us
TruSpeed Performance LLC Salt Lake City, UT 84107 P:(801) 948-0877
Social
Testimonials
Talon T. from Montana
These are great. Took a little long to get but I got the first set of TSP G-Street Coilovers. I use them daily and finally broke in. Perfect for my area. No more body roll. Awesome control. If I need to change my ride height for winter mode I can easily. Thank you TSP.
Adam H. from Illinois
Seem to be built pretty good and would rate quality 7 outta 10 Install was straight forward and everything fit perfect will rate 10/10 for install and fitment Ride quality is good and will need to adjust the dampening again so I will rate the ride quality 7/10 All in all very happy with the coilovers and would recommend to anyone
About the TSP brand
After quite a few years of research and networking with the industry's best manufacturers, and fabricating and building some prototype parts, TruSpeed Performance decided to launch the TSP brand early 2016. We decided to start with a focus on Suspension and Alignment parts as there are so many companies out there increasing and tuning engines but many often neglect tuning the suspension. Not only does a car need to go fast, but it needs to handle as well. We decided to start by offering quality coilover systems for a large variety of vehicles. After a good amount of searching and negotiating, we decided to work with a company out of Taiwan who was putting out an impressive product and that had over 10 years of experience building suspension systems for other major companies. We were impressed by the quality of the materials used, and their willingness to create and customize applications for our customer's needs. We are constantly expanding the applications that are well over 700 at this point.
We plan to continue to grow the brand and are already putting out our Tru-Align Alignment systems to compliment and help best utilize the power of our TSP Racing G Series Coilovers.
Product Description
TSP Racing G Series Coilover kits are built for road and track use, TSP's Coilovers are fully height-adjustable, allowing you to keep the ride height the same as factory, or up to 50mm/2in lower. Damping of the piston valves are matched to each spring rate. The springs are preloaded from the factory, so you don't have to configure that before driving. Just set your ride height and damping preference with the 24 click linear adjustments.The engineers in our factory invest time and money into research and development to ensure the highest quality, best performance kits on the market. TSP Racing Coilovers are not 'one size fits all' with adapters. Each kit is designed specifically for the vehicle, and all kits are tested and developed to ensure maximum performance.
Street Spring Rates
Front
12kg/mm or 672lbs/in
Rear
6kg/mm or 336lbs/in
Damper Style
Front
A-Arm
Rear
Trailing Arm
Each kit contains:
4 x Suspension dampers (either one piece or 2 piece dampers depending on vehicle)
4 x SAE-9254 cold-wound steel springs
4 x Damping force adjustment knobs
2 x Aluminum alloy pillow ball top hat plates
2 x Spanner wrenches to adjust ride height
1 x Owners manual with warranty card
Instruction Manuals
Got your new coilovers and need to know how to properly adjust them?
Aluminum alloy upper mounts, surface anodized treatment, very strong, heat-resistant, wear-resistant, corrosion-resistant aluminum oxide layer. TSP Racing rubber top plates are utilized frequently on our kits. If the front of the vehicle utilizes a camber plate, the rear will use a rubber top plate, although pillowball tops are frequently available for dedicated track vehicles. For all kits in which a camber plate cannot be utilized (A-arm suspensions) the top plates will be rubber front and rear. The main design feature of the rubber top plate is that it dampens NVH from reaching the cabin as much as possible enabling an OEM-like quiet ride. All rubber top plates have a durometer rating of 75A in order to achieve the best balance between performance and comfort.
Pillow Ball Top Hats
The pillowball top plate is used as an upgrade in the rear of a vehicle in lieu of the rubber top plate. Rubber is used as standard to limit NVH from making its way into the cabin although this upgrade is available on various chassis at the customer's request. Please contact us directly to see what options are available for your specific platform. The pillowball top plate is a good upgrade for customers seeking a more track oriented, rigid setup where NVH is not much of a factor.
SAE9254 Steel Springs
Cold roll formed, anti-deformed with its excellent steel property and prolonged life span.3 main styles are used; linear, s-barrel, and v-barrel
Springs are marked with their length and spring rate in mm-kg/mm for example 220-07 os a 220 mm long spring with 07kg/mm spring rate.
French TOTAL Rotary Dedicated Oil
Corresponds to more changing stroke, stable properties can delay the recession, and remain similar viscosity even at extremely high temperatures.
NOK Oil Seals
We use the same NOK Oil seals as Tein. They are used for Anti-attrition and spoilage after long-term usage. Reducing the problem of oil leaks.
Lower Mounts/Base
The lower mount is where our suspension bolts to your wheel hubs. Each lower mount is designed to be an OEM replacement. We provide any and all OEM mounting points and brackets that were on the OEM shock. The lower mount, and the upper mount, is where reverse engineering the OEM suspension plays its biggest role. The process ensures everything is welded and mounted in OEM positions so that your brake lines, wheel speed sensors, and harnesses are a direct fit. Our lower mounts, whenever possible, are made of seamless steel tubing and all brackets are hand welded. Once the lower mount is completed, it is then sand blasted and powder coated in order to prevent rust and corrosion.
Shocks
We are now at the center point of our kit. As you can imagine, we have a wide variety of shock types, lengths and diameters. Each vehicle depending on our data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in our factory and dyno tested before use in our kits. This also helps to ensure there are no oil leaks or noise. Shocks are paired together by their compression and rebound numbers after dyno testing to a 3% variance from side to side. This means that in your kit, the fronts and rears are paired almost exactly the same to ensure proper ride quality and performance of the suspension. Each shock is coated in black via EPD, which provides a cohesive appearance, and to help with corrosion resistance.
Adjustment Rings
Height adjustments are made with separate CNC-Machined locking rings for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows for a conservative drop to more aggressive ride heights for an aggressive stance, or to fine tune your suspension for the circuit to gain full potential of your vehicle's handling capabilities.
Our basic lock ring is located under the spring seat. This ring is special because its primary function is to torque against the spring seat and lock it in place. The lock ring will torque and secure itself to the spring seat securely once properly tightened so that the preload does not change unless the customer decides to make a change. The spring seat and basic lock ring are the two rings that are responsible for gaining leverage to make height adjustment for our coilover systems. Please note that you do not turn the rings independently to adjust height, you simply use them as a leverage point to rotate the shock body into and out of the lower mount to adjust height, but they must be locked together to achieve this.
The lower lock ring is tasked with keeping the shock locked into place once final ride height is selected. The lower lock ring must be loosened before making any sort of height adjustment and locked down properly afterwards using our spanner wrenches.
If you want to lower the vehicle, you spin the spring seat clockwise to thread the shock body into the lower mount.
Tools
Tools that are included in the kit are the spanner wrenches and your adjustment knobs. These tools are what give you the ability to really customize and tune your new suspension system.
The Spanner wrenches are a crucial tool in adjusting the ride height of your vehicle. They allow you to adjust the position of the shock inside the body and insure the tension on your spring.
The adjustment knobs are used to help you customize the overall feel of your ride, whether your damping is soft or firm.
On G-Racing coilovers with 32 click adjustment your recommended settings are;
17-32: Suggested for track use. 9-16: Suggested for mountain/aggressive use. 1-8: Suggested for common street use.
On G-Street Coilovers with 24 click adjustment your recommended settings are;
17-24: Suggested for sportier/aggressive use. 9-16: Suggested for spirited driving use. 1-8: Suggested for common street use.
Warranty
TSP Racing coilovers come with a 1 year unlimited mile limited warranty that covers all the main shock body components.
6 month warranty of consumables like rubber top mount, end links, etc
Camber plates are not covered under this warranty and have warranty because of the metal on metal contact.
All kits are completely rebuildable and individual parts are available separately for purchase.
Adjuster Extensions
Adjuster extensions allow you to remotely adjust your damping on your TSP Racing Coilovers, which is especially handy when they are in hard to reach locations.
Aluminum Plates with Camber Adjustments in the front and Aluminum Plates with Pillow Ball Bushings in the rear
Ride Height Adjustable Shocks
OEM Fitment with brackets and mounting points
Contact Us
TruSpeed Performance LLC Salt Lake City, UT 84107 P:(801) 948-0877
Social
Testimonials
Talon T. from Montana
These are great. Took a little long to get but I got the first set of TSP G-Street Coilovers. I use them daily and finally broke in. Perfect for my area. No more body roll. Awesome control. If I need to change my ride height for winter mode I can easily. Thank you TSP.
Adam H. from Illinois
Seem to be built pretty good and would rate quality 7 outta 10 Install was straight forward and everything fit perfect will rate 10/10 for install and fitment Ride quality is good and will need to adjust the dampening again so I will rate the ride quality 7/10 All in all very happy with the coilovers and would recommend to anyone
About the TSP brand
After quite a few years of research and networking with the industry's best manufacturers, and fabricating and building some prototype parts, TruSpeed Performance decided to launch the TSP brand early 2016. We decided to start with a focus on Suspension and Alignment parts as there are so many companies out there increasing and tuning engines but many often neglect tuning the suspension. Not only does a car need to go fast, but it needs to handle as well. We decided to start by offering quality coilover systems for a large variety of vehicles. After a good amount of searching and negotiating, we decided to work with a company out of Taiwan who was putting out an impressive product and that had over 10 years of experience building suspension systems for other major companies. We were impressed by the quality of the materials used, and their willingness to create and customize applications for our customer's needs. We are constantly expanding the applications that are well over 700 at this point.
We plan to continue to grow the brand and are already putting out our Tru-Align Alignment systems to compliment and help best utilize the power of our TSP Racing G Series Coilovers.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.
Returns Policy
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Shipping
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.
Comodous:
Comodous in tempor ullamcorper miaculis
Mattis laoreet:
Pellentesque vitae neque mollis urna mattis laoreet
Divamus de ametos:
Divamus sit amet purus justo
Molestie:
Proin molestie egestas orci ac suscipit risus posuere loremous
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy
